Blog

5 Signs That Your Plumbing Parts Need Repair

Sep 26th 2018

5 Signs That Your Plumbing Parts Need Repair

Most plumbing problems are obvious, such as water backflow or a big leak. But, other problems aren’t as easy to diagnose. For example, did you know that a knocking sound from your pipes indicates the need for plumbing repairs? Here are 5 signs that indicate the need for new plumbing parts and plumbing repairs.

Knocking

If you hear knocking even though nobody is at the door, then you might have plumbing problems. A knocking sound from your pipes can have different causes, and all of them require plumbing repairs. For example, there might be a loose valve in the system, or the support straps are loose. It’s also possible that the water pressure is too high, which can cause the pipes to jerk around and make that dreaded knocking sound.

Low Water Pressure

Unless you’re running the sprinkler system outside, there should be no reason for low water pressure inside. Low water pressure is almost always an indication of a leak or a clog. However, it can be difficult to find the culprit, because the burst pipe might be behind the wall or buried underground.

Dripping

It’s not uncommon for faucets to drip. The problem might be that the water pressure is too high, but it’s also possible that the valve inside the faucet or the entire faucet needs to be replaced. You can buy faucets and other plumbing repair parts wholesale, but you should never ignore dripping as this can damage your plumbing. In the meantime, it also wastes water.

Slow Drains

When the water in the tub or shower or sink isn’t draining as quickly as it should be, you can usually fix the problem by cleaning the drain with vinegar, boiling water, or commercial drain cleaner. In some cases, the clog is deep inside the pipes, and professional tools are necessary to remove it.

Colored Water

Water should always be clear when it comes out of your pipe. If the water is colored, then that’s a sign that you need plumbing repairs. Cloudy or white water just signifies air in your pipes, and you’ll see that after turning off the water supply and turning it back on. But, brown, red, or yellow water is a sign that your pipes are old. Green and blue water is also a sign of corrosion of your copper pipes, which requires immediate attention and the installation of new pipes.